0401 161 999
info@swordsky.com.au
EN|中文
SWORD SKY Outdoor
About Services Installs How It Works Install Process Contact
0401 161 999 info@swordsky.com.au WeChat: AUSTRALIA-SYDNEY

Local Outdoor Structure Installers

Bought the kit?
We’ll build it right.

Louvred pergolas, awnings, carports, retractable roofs, zip blinds and sunrooms — professionally installed across Sydney, Newcastle, the Central Coast, Wollongong and Canberra, no matter where you bought them. Alibaba, AliExpress, Facebook, a WhatsApp supplier or a local store: we assemble, anchor, seal and finish it properly. We’re a local team — the same people who quote your job turn up to install it.

Scroll
Any
Brand or Supplier
2002
In Construction Since
100%
Licensed & Insured
NSW
+ ACT · Sydney & Regions

Doesn’t matter where
you bought it.

AlibabaAliExpressFacebook MarketplaceWhatsApp / WeChat SellersAmazon & eBayOverseas FactoriesLocal RetailersExisting Structures

Install-only specialists
for outdoor living

More homeowners are buying pergolas, awnings, carports and outdoor blinds direct from overseas factories and online sellers — and saving thousands doing it. The catch? The kit turns up in a pile of crates with a thin manual, and most local builders won’t touch a product they didn’t sell.

That’s where we come in. Sword Sky installs outdoor structures regardless of where they were purchased — Alibaba, AliExpress, Facebook Marketplace, a supplier you found on WhatsApp or WeChat, or a local store. We check the kit, set out and build proper footings, fix to your home’s structure, and seal every joint so it stays watertight through the heaviest storm.

We’re a local team — not a middleman or an overseas call centre. The people who quote your job are the people who turn up to build it, backed by the same standards as our commercial fit-out work: licensed, insured, on time, and cleaned up when we leave.

white louvre pergola with LED lighting on a Sydney balcony — Sword Sky outdoor installation

Six products.
One trusted local installer.

01

Louvred Pergolas

Motorised and manual aluminium louvre roofs, freestanding or attached. Level set-out, post footings, gutter and downpipe connection, ready to use on day one.

02

Awnings & Patio Covers

Polycarbonate and aluminium awnings — wall-mounted or post-supported. Correct fall for drainage, secure fixing to brick, render or fascia, and fully sealed flashings.

03

Carports

Cantilever and post-and-beam carports with polycarbonate or aluminium roofing. Engineered footings and anchoring so the structure stays put in strong winds.

04

Retractable Awnings & Roofs

Folding-arm awnings, telescopic pool enclosures and retractable patio roofs. Solid wall fixing and precise alignment so everything extends smoothly and sits tight when closed.

05

Zip Track & Outdoor Blinds

Zip-track, straight-drop and motorised outdoor blinds fitted to pergolas, awnings and patios for shade, privacy and weather protection all year round.

06

Sunrooms & Enclosures

Aluminium-framed sunrooms and polycarbonate enclosures that turn an open patio into a light-filled, all-weather room — squared, glazed and weather-sealed.

From crates on the driveway
to a finished structure

Haven’t bought yet? Send us the listing before you order and we’ll tell you honestly whether it will suit your site.

01

Send the Details

WhatsApp, WeChat or email us the product link, drawings or packing list, plus a few photos of where it’s going.

02

Site Check & Quote

We confirm measurements, ground and fixing conditions, then give you a clear fixed quote — no surprises later.

03

Kit Check & Install

We inventory the kit before install day, then set out, pour footings, assemble and fix — level, square and secure.

04

Seal, Test & Handover

Flashings sealed, gutters connected, louvres and blinds tested. We walk you through operation and clean up.

From the box
to a finished pergola

One real louvre pergola install, start to finish. These are the steps we follow on every job, so you know what happens on your site and why each step matters.

Pergola installation step 1: Delivery and Kit Check — Sword Sky Sydney
Step 01

Delivery & Kit Check

The kit arrives in crates. Before we touch a tool, we open every box and check each part against the packing list, so nothing is missing on install day.

Pergola installation step 2: Beam End Plates — Sword Sky Sydney
Step 02

Beam End Plates

Connection plates are fitted to the beam ends. These plates carry the load from the roof into the posts, so we check every bolt and seat.

Pergola installation step 3: Post-to-Beam Connection — Sword Sky Sydney
Step 03

Post-to-Beam Connection

Each post is joined to the beam with a steel plate and stainless fixings, then checked so it sits plumb and square.

Pergola installation step 4: Frame Goes Up — Sword Sky Sydney
Step 04

Frame Goes Up

Posts and perimeter beams are stood up and fixed together. We check level and square across the whole frame before moving on.

Pergola installation step 5: Securing Every Joint — Sword Sky Sydney
Step 05

Securing Every Joint

Every post-to-beam joint is bolted up and tightened. This is what keeps the structure rigid in strong wind.

Pergola installation step 6: Cantilever Overhang Arms — Sword Sky Sydney
Step 06

Cantilever Overhang Arms

Cantilever arms are bolted along the beam at even spacings. They carry the overhang section that projects past the balcony edge, with no extra posts needed.

Pergola installation step 7: Overhang Frame Complete — Sword Sky Sydney
Step 07

Overhang Frame Complete

The outer overhang frame is fixed to the ends of the arms, then checked for level and alignment. Cables are run through the frame, ready for power.

Pergola installation step 8: Waterproof Connections — Sword Sky Sydney
Step 08

Waterproof Connections

The plug-and-play cables for the motor and LEDs are joined with sealed, weatherproof connectors and tucked away inside the frame.

Pergola installation step 9: Fitting the Louvres — Sword Sky Sydney
Step 09

Fitting the Louvres

Each aluminium blade is clipped into its pivot and linked to the drive arm, so every blade opens and closes together.

Pergola installation step 10: Wall Flashing — Sword Sky Sydney
Step 10

Wall Flashing

A flashing angle is fitted and sealed where the roof meets the wall. This stops rain getting in behind the pergola.

Pergola installation step 11: Lights On — Sword Sky Sydney
Step 11

Lights On

Power on. We test the louvres through their full range and check every LED strip before handover.

Pergola installation step 12: Finished and Handed Over — Sword Sky Sydney
Step 12

Finished & Handed Over

Blinds fitted, site cleaned up, and we show you how to use the remote. Your outdoor room is ready to use.

Imported kits.
Local standards.

Any Brand, Any Supplier

We don’t care where it came from — only that it goes up properly. No lectures about where you shopped.

We Can Talk to Your Supplier

Missing part or unclear drawing? We can liaise with your seller directly over WhatsApp or WeChat to sort it out fast.

Local Team, Local Knowledge

We live and work here, and we know local council rules and ground conditions.

Licensed & Fully Insured

NSW-licensed trades with full public liability and workers’ comp cover on every job, no exceptions.

“A good product installed badly will leak. A good install makes even a budget kit perform. That’s the part we take care of.”
— Sword Sky Outdoor Team
Will you install a pergola I bought on Alibaba or AliExpress?

Yes. Most of our outdoor installs are imported kits. Send us the listing or packing list and photos of your site and we’ll quote the installation.

Do I need council approval?

Many pergolas, awnings and carports fall under NSW exempt development rules, but it depends on size, height, location and your property. We’ll flag anything that may need approval or engineering before we start.

What if parts are missing or damaged?

We check the kit before install day. If anything is short or damaged, we help you raise it with your supplier so the job isn’t held up on the day.

How long does installation take?

Most standard pergolas, awnings and carports are installed in one to two days once footings are ready. Larger structures and enclosures can take longer — we’ll give you a clear timeframe with your quote.

Can you install on a balcony, deck or tiled area?

Yes. We check the surface and the structure underneath first, then choose the right fixings or footings so the pergola is secure without damaging your tiles or waterproofing.

Do the motor and LED lights need extra work?

Most louvre roofs and outdoor blinds are plug-and-play. We connect and test the motor, LED lighting and remote so everything works before we leave.

Haven’t ordered yet — can you check the kit first?

Please do. Send us the product link before you buy and we’ll let you know if the size, fixing method and specs suit your site, so you don’t pay for the wrong kit.

Which areas do you cover?

All of Greater Sydney, plus the Central Coast, Newcastle and the Hunter, Wollongong and the Illawarra, the Blue Mountains, the Southern Highlands and Canberra (ACT). Outside these areas? Ask us — we travel for the right job.

Service AreasInstalling across Sydney,
regional NSW & Canberra

Kit arrived?
Let’s get it built.

Send us your product link or packing list and a few photos of the site. Our local team will get back to you as soon as possible with a straight answer and a fair installation quote.